minimum order value Floristik24.co.uk: 25 £
Last Minute
Glue cartridges hot glue glue sticks Ø11mm 1pc
£ 0,20
*
- %
Glue cartridges hot glue glue sticks Ø11mm 1pc
£ 0,20
*
Delivery till 6. May **
Menge: 641
ID: 1430
Model: 2344321
Whether for DIY, in the household or in floristry - glue cartridges are always needed for the hot glue gun. With the hot melt adhesive, fixing silk flowers, natural items, paper and pieces of wood becomes child's play. The hot glue can also be used for collages.
The high-temperature hot-melt glue is very easy to use with the right glue gun and is hardly visible at the end thanks to the transparent color. The glue cartridge has a diameter of about 11 millimeters and is about 20 centimeters long.
Processing instructions:
The adhesive surfaces must be free of dust, dirt, moisture, grease and release agents. Plasticizers in plastics and paints can affect the durability of the bond. Apply hot melt as a dot, film, or bead and immediately press the parts together. Brief pressing increases the strength.
Areas of application:
The hot-melt adhesive is used in floristry, household and hobby. The glue cartridges are suitable for HB181 high temperature hot glue guns.
Characteristics:
The adhesive is clear and has good adhesion to many materials such as wood, wood-based materials, paper, cardboard, textiles, glass, ceramics and plastics such as melamine, PS, PVC, PMMA, PC and PU foam.
Texture :
The components of the hot-melt adhesive can be classified as harmless. There is no special labeling of this product in terms of the Ordinance on Hazardous Substances.
Please note:
Slight differences in color of the hot-melt adhesive do not represent a quality defect.
During processing, the material and nozzle can reach temperatures of up to 200°C. wear warm gloves.
Manufacturer: Stages
Material : ethylene vinyl acetate (EVA) based adhesive
Softening point : Approx. 90 °C ring and ball
Heat resistance : Approx. 60 °C (according to WPS 68, shear load 100 g/cm² adhesive surface)
Viscosity : Approx. 15,000 mPas at 180 °C (Brookfield)
Density : Approx. 0.98 g/cm³ Solid content : 100%
Processing temperature : 170 - 190 °C
Open time : Approx. 25 s., depending on the material and the amount applied, (bead application diameter 3 mm, 180 °C), material beech (4 mm thick).
Setting time : Approx. 30 s, depending on the insulating effect of the materials, type of application and material (see also open time)
Colour: Colorless clear
Diameter : Ø11mm
Length : 20cm
Quantity: 1 piece
The high-temperature hot-melt glue is very easy to use with the right glue gun and is hardly visible at the end thanks to the transparent color. The glue cartridge has a diameter of about 11 millimeters and is about 20 centimeters long.
Processing instructions:
The adhesive surfaces must be free of dust, dirt, moisture, grease and release agents. Plasticizers in plastics and paints can affect the durability of the bond. Apply hot melt as a dot, film, or bead and immediately press the parts together. Brief pressing increases the strength.
Areas of application:
The hot-melt adhesive is used in floristry, household and hobby. The glue cartridges are suitable for HB181 high temperature hot glue guns.
Characteristics:
The adhesive is clear and has good adhesion to many materials such as wood, wood-based materials, paper, cardboard, textiles, glass, ceramics and plastics such as melamine, PS, PVC, PMMA, PC and PU foam.
Texture :
The components of the hot-melt adhesive can be classified as harmless. There is no special labeling of this product in terms of the Ordinance on Hazardous Substances.
Please note:
Slight differences in color of the hot-melt adhesive do not represent a quality defect.
During processing, the material and nozzle can reach temperatures of up to 200°C. wear warm gloves.
Manufacturer: Stages
Material : ethylene vinyl acetate (EVA) based adhesive
Softening point : Approx. 90 °C ring and ball
Heat resistance : Approx. 60 °C (according to WPS 68, shear load 100 g/cm² adhesive surface)
Viscosity : Approx. 15,000 mPas at 180 °C (Brookfield)
Density : Approx. 0.98 g/cm³ Solid content : 100%
Processing temperature : 170 - 190 °C
Open time : Approx. 25 s., depending on the material and the amount applied, (bead application diameter 3 mm, 180 °C), material beech (4 mm thick).
Setting time : Approx. 30 s, depending on the insulating effect of the materials, type of application and material (see also open time)
Colour: Colorless clear
Diameter : Ø11mm
Length : 20cm
Quantity: 1 piece
google_translate
Product.Nr.: 2344321
weight: 0,05 kg
Delivery till: 6. May **
£ 0,20
*
- daily new articles
- various payment options
- 97% positive customer reviews
- weekly discount promotions in the newsletter
- our YouTube channel explains many articles
- extensive customer service
*
All prices exclude VAT and customs duties,
excl. shipping costs. Crossed-out prices correspond to the previous price.
** Except prepayment. After the invoice amount has been credited to our account, we will process your order immediately.
** Except prepayment. After the invoice amount has been credited to our account, we will process your order immediately.
Cat-ID: 28
minimum order value Floristik24.co.uk: 25 £
Adhesive tapes, special glues
Article with only small quantities.
seasonal items cannot be reordered!
Last Minute
all subcategories at a glance
- Artificial flowers
- Artificial fruit
- Autumn decor 2024
- Bowls, pots & vases
- Candles
- Christmas decorations 2024
- Decorative stones & sand
- Floral foam
- Floristry tools & accessories
- Memorial floristry
- Metal buckets & zinc vessels
- Natural products
- Ribbons & gift ribbon
- Spring decor 2024
- Summer decoration 2024
- Wedding decoration
- Wickerwork & baskets
- Wire products
decoration ideas
Influencer wanted