With the Belton free water-based paint as a clear coat from the can, you are opting for environmentally friendly and user-friendly spray painting. The transparent, water-based paint is odorless and is suitable for reliable color sealing and final painting of glass, metal, wood and paintable plastics. Highly absorbent substrates such as styrofoam should be primed beforehand.
Then use the clear spray paint as a luminous finish for the Belton high gloss paint sprays in RAL tones. The clear coat can be used inside and outside. After twenty-four hours of drying, the gloss varnish also has very good weather resistance.
The Belton free water-based paint as a clear coat is supplied in a 400 milliliter spray can. The quantity corresponds to the spray cans with Belton color lacquer. Depending on the substrate, the clear lacquer is sufficient for about two square meters. Before use, you should shake the spray can well for about a minute and after painting turn it upside down and spray it out to prevent the nozzle from sticking.
Special product features:- Fast drying - can be combined with colored varnish
- Suitable for indoor and outdoor use (indoor use does not cause any damage to health)
- Waterproof, smudge-proof and UV and weather resistant
- Odorless and almost solvent-free
- Aromatics free
Please note : Be sure to read the instructions for use and warnings on the back of the can before use! You can download the manufacturer's safety data sheet under the
Downloads menu item.
Color : Clear High Gloss
Content : 400ml
Manufacturer : Belton - Peter Kwasny GmbH
hazard warnings
EUH208: Contains individually or as a mixture: 1,2-Benzisothiazol-3(2H)-one, 2-Methyl-2H-isothiazol-3-one, 5-Chloro-2-methyl-2H-isothiazol-3-one. Can cause allergic reactions.
H222: Extremely flammable aerosol
H229: Pressurized container, may burst if heated.
Precautions :
P101 If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50°C / 122°F.
P501: Dispose of contents/container in accordance with local/regional/national international regulations.
Without adequate ventilation formation of explosive mixtures possible.
Caution! Dangerous respirable droplets can form when sprayed. Do not breathe aerosol or mist.
Do not store in living quarters.
Use only in accordance with the intended purpose.
google_translate
product description
YouTube DIY-Studio...
