1. Product and company identification

• Product name: Wrapping paper with silk ribbon and tags 4 sheets in a set 50 × 70cm

• Manufacturer/Importer: Kaemingk B.V.

• Address: NL 7122 MN Aalten , Broekstraat 13

• Contact: info@kaemingk.com

2. Description of the product

• Intended use: Packaging materials and flower packaging for floristry, decoration and the safe transport of bouquets and arrangements.

• Material composition:

  • Materials: plastic films (e.g. PE, PP), paper, cellophane, jute, textile fabrics or combined materials.

  • Additives: dyes, coatings, adhesives, tapes, prints or water-repellent sealants.

3. Possible dangers

• Fire hazard: Plastic and paper materials are highly flammable and can catch fire quickly.

• Choking hazard: Thin plastic films or small parts can be swallowed or inhaled by children or pets.

• Cuts: Sharp edges or hard materials such as straps can cause cuts.

• Environmental impact: Improper disposal may cause environmental pollution.

4. Safety instructions

4.1 General safety instructions

• Keep away from children and pets, especially plastic films.

• Keep away from open flames, heat sources and sources of ignition.

• Handle sharp edges carefully to avoid injury.

4.2 Notes on use

1. Use packaging materials only for their intended purpose.

2. Do not place plastic films and packaging over the face or respiratory tract to avoid the risk of suffocation.

3. Protect paper and cellophane packaging from moisture unless it is waterproof.

4. Make sure that straps or fasteners are attached securely and securely.

4.3 Storage instructions

• Store in a dry and cool place to avoid material deformation or damage.

• Protect from direct sunlight to prevent discoloration or damage.

• Store plastic packaging safely to avoid tangling or kinking.

5. First aid measures

• In case of cuts: Clean and disinfect the wound and seek medical attention if necessary.

• If small parts are swallowed: Do not give food or drink and seek medical attention immediately.

• If particles or plastic residues are inhaled: ensure fresh air supply; if symptoms persist, seek medical advice.

• If skin irritation occurs due to coatings: Clean affected areas thoroughly with soap and water.

6. Firefighting measures

• Suitable extinguishing media: water, CO₂, foam, powder.

• Special measures: In case of fire, be aware of toxic fumes from melting plastic. Wear respiratory protection.

7. Storage and transport

• Storage:

  • Store in a dry place protected from light.

  • Protect from mechanical damage.

• Transport:

  • Stack packaging materials safely and protect them from moisture.

8. Disposal instructions

• Material-dependent disposal:

  • Paper packaging: Recycling according to local regulations.

  • Plastic films: Recycling or disposal in residual waste according to specifications.

  • Combined materials: residual waste according to local regulations.

• Recycle packaging materials according to local regulations.

9. Additional information

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at info@kaemingk.com.