1. Product and company identification

• Product name: Plug fly agaric 7cm L33,5cm 16 pcs

• Manufacturer/Importer: IGB-Gruppe GmbH

• Address: DE 45894 Gelsenkirchen , Erlestraße 95

• Contact: info@igb-gruppe.de

2. Description of the product

• Intended use: Decorative items for autumn, including table decorations, pumpkins, pendants, figurines, arrangements and floristic materials.

• Material composition:

  • Materials: wood, plastic, ceramics, metal, textiles, glass, polystyrene or natural materials (e.g. branches, dried flowers, cones).

  • Surfaces: Painted, printed, coated or decorated with glitter and paint.

  • Additives: paints, adhesives, coatings or decorative elements such as ribbons, feathers, moss or artificial flowers.

3. Possible dangers

• Fire hazard: Decorative materials such as wood, textiles, natural materials and polystyrene are highly flammable.

• Choking hazard: Small parts or decorative elements can be swallowed by children or pets.

• Cuts: Sharp edges on glass, metal or ceramic elements can cause injuries.

• Dust development: Natural materials such as dried flowers, moss or cones can release dust particles that irritate the respiratory tract.

• Chemical exposure: Paints, adhesives and coatings can cause irritation if they come into direct contact with the skin.

4. Safety instructions

4.1 General safety instructions

• Keep away from children and pets, especially small parts or elements that could be swallowed.

• Keep away from open flames and sources of ignition.

• Avoid dust formation and use in well-ventilated areas.

• If you have sensitive skin, use protective gloves.

4.2 Notes on use

1. Use decorative items only for their intended decorative purpose.

2. Make sure it is securely fastened to avoid it falling.

3. When handling glass or ceramic, be aware of the risk of breakage and handle with care.

4. Handle glitter, dust or natural materials with care and clean the surface regularly.

5. Protect decoration from moisture unless it is suitable for outdoor use.

4.3 Storage instructions

• Store in a cool, dry place protected from light to avoid material damage and discoloration.

• Pack fragile items securely and store them in a shock-protected manner.

• Keep away from open flames and heat sources.

5. First aid measures

• In case of cuts caused by sharp edges: Clean and disinfect the wound and seek medical attention if necessary.

• If skin irritation occurs due to paints or coatings: Clean thoroughly with soap and water.

• If eye irritation occurs due to dust or glitter: Rinse eye carefully with clean water and seek medical advice.

• If small parts are swallowed: Do not give food or drink and seek medical attention immediately.

• If dust or particles are inhaled: Provide fresh air and seek medical advice if symptoms occur.

6. Firefighting measures

• Suitable extinguishing media: CO₂, foam, powder, water.

• Special measures: Wear respiratory protection as toxic fumes may be produced when coated or natural materials are burned.

7. Storage and transport

• Storage:

  • Store in a cool, dry and dust-free place.

  • Pack fragile materials to protect them from shock.

• Transport:

  • Stack products safely and protect them from impacts and moisture.

8. Disposal instructions

• Material-dependent disposal:

  • Wood and natural materials: composting or residual waste.

  • Plastic parts: recycling or residual waste according to local regulations.

  • Glass or ceramic elements: old glass or residual waste.

  • Coated or combined materials: Dispose of via residual waste.

• Recycle packaging materials according to local regulations.

9. Additional information

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at info@igb-gruppe.de.