1. Product and company identification

• Product name: Plant Head Polyresin Bust Planter Pink 13.5×13×14cm

• Manufacturer/Importer: IGB-Gruppe GmbH

• Address: Erlestraße 95, 45894 , Gelsenkirchen , DE, +49 209 3598 2666,

• Contact: info@igb-gruppe.de

2. Description of the product

• Intended use: Ceramic plant pots for planting and decoration indoors and outdoors.

• Material composition:

  • Materials: Ceramic, partially glazed or untreated.

  • Additives: paints, varnishes or protective coatings.

3. Possible dangers

• Risk of falling and injury: Large or heavy plant pots can fall if handled improperly.

• Risk of mechanical injury: Sharp edges or broken parts can cause cuts.

• Material stress: Excessive stress from plants or soil can lead to cracks or breaks.

• Environmental impact: Improper disposal may cause environmental pollution.

4. Safety instructions

4.1 General safety instructions

• Keep away from children and pets, especially large or heavy planters.

• Handle sharp or damaged edges with care.

• Observe maximum load to avoid material failure.

4.2 Notes on use

1. Check planters for cracks or damage before use.

2. When used outdoors, make sure that the planters are frost-resistant.

3. Do not place excessive strain on it or use it for other purposes.

4. Avoid direct contact with hard or sharp objects.

4.3 Storage instructions

• Store in a dry and protected place to avoid breakage or damage.

• Protect frost-sensitive ceramic products from low temperatures.

5. First aid measures

• In case of cuts caused by sharp edges: Clean and disinfect the wound and seek medical attention if necessary.

• If skin irritation occurs due to material abrasion: Clean thoroughly with soap and water.

• In case of eye injury caused by falling objects: Get medical advice immediately.

6. Firefighting measures

• Material is not flammable , but surface coatings or packaging may burn.

• Suitable extinguishing agents: CO₂, foam, powder.

• Special measures: Wear respiratory protection when paintwork is burning.

7. Storage and transport

• Storage:

  • Stack products safely to avoid breakage or damage.

  • Protect ceramics from strong temperature fluctuations.

• Transport:

  • Pack products securely to avoid breakage or scratches.

8. Disposal instructions

• Material-dependent disposal:

  • Ceramics: residual waste according to local regulations.

  • Coated ceramics: Disposal via residual waste.

• Recycle packaging materials according to local regulations.

9. Additional information

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at info@igb-gruppe.de.