1. Product and company identification

• Product name: color spray Fluorescent Pink Paint Spray Montana Cans 400ml

• Manufacturer/Importer:

• Address:

• Contact:

2. Description of the product

• Intended use: Special sprays for decoration, floristry and creative applications.

• Material composition:

  • Ingredients: Acetone, n-butyl acetate, 2-methoxy-1-methylethyl acetate, propane, butane, isobutane, ethanol, 2-propanol, titanium dioxide, xylene.

3. Hazard warnings

• H222: Danger. Extremely flammable aerosol.

• H229: Pressurized container: May burst if heated.

• H319: Causes serious eye irritation.

• H336: May cause drowsiness or dizziness.

• EUH066: Repeated exposure may cause skin dryness or cracking.

• EUH211: Warning! Spraying may produce hazardous respirable droplets. Do not breathe aerosol or mist.

4. Precautions

4.1 General precautions

• P101: If medical advice is needed, have product container or label at hand.

• P102: Keep out of reach of children.

4.2 Handling and use

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

• P211: Do not spray on an open flame or other ignition source.

• P251: Do not pierce or burn, even after use.

• P260: Do not breathe spray.

• EUH211: Ensure adequate ventilation when spraying.

4.3 Storage

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

5. First aid measures

• If skin contact occurs: Wash thoroughly with soap and water. Avoid repeated contact.

• In case of eye contact: Rinse immediately with plenty of clean water and seek medical advice.

• If inhaled: Remove affected person to fresh air. If drowsiness or dizziness occurs, seek medical attention.

• If swallowed: Get medical advice immediately. Do not induce vomiting.

6. Firefighting measures

• Suitable extinguishing agents: CO₂, foam, powder.

• Special measures: Move containers out of danger zone if this can be done without risk. Wear respiratory protection.

• Note: Sprays may burst when heated and form explosive mixtures.

7. Storage and transport

• Storage:

  • Store in a cool, dry and well-ventilated place.

  • Always keep containers tightly closed.

• Transport:

  • Protect from mechanical damage.

  • Do not expose to temperatures above 50 °C.

8. Disposal instructions

• Dispose of contents/container in accordance with local regulations.

• Do not release containers or residual contents into the environment.

9. Additional information

• Without adequate ventilation: formation of explosive mixtures possible.

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at .