1. Product and company identification

• Product name: Bowl with base terracotta Ø26cm

• Manufacturer/Importer: H. Andreas GmbH

• Address: DE 97232 Giebelstadt-Sulzdorf, Hohlweg 1

• Contact: info@h-andreas.com

2. Description of the product

• Intended use: Plastic planters for planting and decoration indoors and outdoors.

• Material composition:

  • Materials: Various types of plastic (e.g. polypropylene, polyethylene, PVC).

  • Additives: UV stabilizers, color pigments or coatings to improve weather resistance.

3. Possible dangers

• Risk of falling and injury: Large or heavy planters can fall if handled improperly.

• Risk of mechanical injury: Sharp edges or broken parts can cause cuts.

• Material stress: Excessive stress from soil or plants can lead to cracks or breaks.

• Environmental impact: Plastic parts can pollute the environment if disposed of improperly.

4. Safety instructions

4.1 General safety instructions

• Keep away from children and pets, especially large or heavy planters.

• Handle sharp or damaged edges with care.

• Observe maximum filling quantities to avoid material failure.

4.2 Notes on use

1. Inspect planters for damage or wear before use.

2. When using outdoors, make sure the containers are suitable for the weather conditions.

3. Do not place excessive strain on it or use it for other purposes.

4. Avoid direct contact with sharp or pointed objects.

4.3 Storage instructions

• Store in a dry and protected place to avoid material fatigue or deformation.

• Protect plastic containers from direct sunlight unless UV stabilised.

5. First aid measures

• In case of cuts caused by sharp edges: Clean and disinfect the wound and seek medical attention if necessary.

• If skin irritation occurs due to material abrasion: Clean thoroughly with soap and water.

• In case of eye injury caused by falling objects: Get medical advice immediately.

6. Firefighting measures

• Suitable extinguishing agents: CO₂, foam, powder.

• Special measures: Plastic parts can release toxic fumes in case of fire – wear respiratory protection.

• Note: Plastic planters are flammable and should not be placed near open flames.

7. Storage and transport

• Storage:

  • Stack planters securely to avoid deformation or damage.

  • Protect plastic parts from moisture and extreme temperatures.

• Transport:

  • Pack products securely to avoid breakage or scratches.

8. Disposal instructions

• Material-dependent disposal:

  • Plastic parts: Recycling according to local regulations.

  • Damaged or unusable containers: residual waste.

• Recycle packaging materials according to local regulations.

9. Additional information

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at info@h-andreas.com.