The Belton basic styrofoam primer is an efficient special spray to prepare for the paintwork. By priming with the spray can, you fill the pores so that after two to three coats a smooth, easy-to-paint surface is created. Thanks to the 360° spray nozzle, overhead painting is also possible without any problems, which means that you can achieve very clean results with the primer spray. However, before using the special spray and between spraying, you should sand the surface. The primer can be optimally combined with Belton's color sprays. The advantage of the styrofoam primer from the...
The Belton basic styrofoam primer is an efficient special spray to prepare for the paintwork. By priming with the spray can, you fill the pores so that after two to three coats a smooth, easy-to-paint surface is created. Thanks to the 360° spray nozzle, overhead painting is also possible without any problems, which means that you can achieve very clean results with the primer spray. However, before using the special spray and between spraying, you should sand the surface. The primer can be optimally combined with Belton's color sprays.
The advantage of the styrofoam primer from the spray can is clearly that it takes very little time. The spray can should be shaken thoroughly for two minutes. The spray distance is about 15 to 25 centimeters. With the Belton basic styrofoam primer you can easily prepare scenery and props, sculptures made of styrofoam or even styrofoam wreaths and rings for colorful layers of paint. The coarse-pored base material is no longer recognizable under the even coat of paint of the special primer and the illusion is perfect!
Special product features:- Can be painted over with colored lacquer or clear lacquer after three hours
- Especially for styrofoam - pore-filling primer
- Creates smooth surfaces - Excellent adhesion promotion
- Easy processing and fast drying
Please note : Be sure to read the instructions for use and warnings on the back of the can before use! You can download the manufacturer's safety data sheet under the
Downloads menu item.
Color : Beige
Content : 400ml
Manufacturer : Belton - Peter Kwasny GmbH
hazard warnings
EUH208: Contains EC921-024-6 hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, < 5% n-hexane, <0.1% benzene, EC927-241-2 hydrocarbons, C9-C10, n- Alkanes, isoalkanes, cyclics, <2% aromatics, <0.1% benzenes. Can cause allergic reactions.
H222: Extremely flammable aerosol
H229: Pressurized container, may burst if heated.
H315: Causes skin irritation.
H336 May cause drowsiness and dizziness.
H412: Harmful to aquatic life with long lasting effects.
Precautions :
P101 If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P261: Avoid breathing vapour/spray.
P271: Use only outdoors or in a well-ventilated area.
Avoid the release of P273 into the environment.
P302+P352: IF ON SKIN: Wash with plenty of water.
P312: Call a POISON CENTER/doctor if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50°C / 122°F.
P501: Dispose of contents/container in accordance with local/regional/national international regulations.
Without adequate ventilation formation of explosive mixtures possible.
Caution! Dangerous respirable droplets can form when sprayed. Do not breathe aerosol or mist.
Do not store in living quarters.
Use only in accordance with the intended purpose.
google_translate
Item currently sold out. It could be that he will be available later.
